Home › Service Areas › Circle Pines › Concrete Washing
ANOKA COUNTY, MN
Concrete washing in Circle Pines, MN
The one surface around your home where real pressure is the right tool.
Circle Pines driveways, walks and patios take salt, sand, freeze-thaw and a summer of sprinkler water every year. Glass House cleans them at real pressure, through a surface cleaner rather than a wand, so the finish comes out even.
Rust and oil receive their own chemistry on request, and stripping, sanding and sealing are specialty projects Carson prices in person after testing what, if anything, is already on the slab.
HONEST EXPECTATIONS
Porous concrete may need a stronger treatment and may not return to a perfectly uniform finish. We tell you before we begin.
★ Rated 4.9 on Google · 44 reviews
Insured to $2M
Owner-operated
Based in Ham Lake
CIRCLE PINES SPECIFICS
What concrete washing means in Circle Pines
The local conditions that shape how Glass House approaches concrete washing in Circle Pines, and the standards it holds to on every visit.
STORMWATER
Only stormwater in the storm sewer
Circle Pines City Code prohibits discharging pollutants or polluted water into the storm sewer system. Only stormwater and a short list of exempt flows may enter it. Motor oil and chemicals rinsed off a driveway and into the street are the kind of pollutants the code keeps out of that system. Runoff is diluted heavily and watched closely, and oil is treated on the slab, not rinsed away.
WATER
About 310 PPM of hardness
Circle Pines water, supplied by Centennial Utilities from two wells, runs about 310 PPM (parts per million) of hardness, well above the 180 PPM level the USGS calls very hard. When sprinkler or hose water evaporates, calcium and other dissolved minerals stay behind as white spots and film on glass and siding. Deposits left through several summers bond to the glass and become much harder to remove. Rust treatment on a slab lasts only after the sprinkler heads that caused it are re-aimed.
HOMES
Many homes from the 1950s
The median Circle Pines home was built in 1981, and about 27.5% of homes date from the 1950s. Homes from the 1950s often have storm windows, painted trim and aging finishes. Decades of sun chalk and thin old paint, and high pressure can lift it or force water behind aging trim, so these homes need a gentle, low-pressure wash. Slabs that age have seen decades of freeze-thaw and salt, and we point out any scaling.
TREES
Oaks and elms across the city
Circle Pines describes oaks and elms scattered across its two square miles, and in 2018 the city contracted for emerald ash borer management. Mature shade keeps north walls and roofs damp long after rain and dew, and damp, shaded surfaces are where algae, mildew and moss take hold. Oak and elm leaves also settle in gutters and on roofs, where they hold moisture against the surface. Shaded slabs grow green film, which the pre-treatment kills before the surface cleaner lifts it.
Sources: Circle Pines City Code, Section 1360.08; Centennial Utilities, Water; Circle Pines 2025 Drinking Water Report; USGS, Hardness of Water; Point2Homes, Circle Pines demographics (U.S. Census ACS 2019-2023); City of Circle Pines, About; Quad Community Press (2018).
HOW WE CLEAN CONCRETE
Even, stripe-free and safe for the slab
Concrete is not siding or shingles. It is the one surface where real pressure is correct, provided it is applied evenly and the slab is old enough to take it.
PRESSURE ON CONCRETE ONLY
When we say we never pressure wash, we mean your siding and your roof, which receive a soft wash at low pressure. Concrete is dense enough to take 2,000 to 3,500 psi, and on concrete that pressure is what cleans it properly.
01
Walk it and check its age
Every job starts with a walk-around. Carson looks for cracks, scaling, stains and existing sealer, and confirms the concrete is at least two years old. Sealed or stamped concrete receives a test corner first, so the method is proven on a spot nobody looks at.
02
Pre-treat the growth
A sodium hypochlorite pre-treatment goes on first, so organic growth is killed at the root rather than blasted around. Oil and rust are separate treatments with their own chemistry, handled on request in a fixed order: degreaser first, then the organic wash, then acid last and alone.
03
Surface cleaner, not a wand
A surface cleaner, a round housing with a spinning spray bar inside, lays down even passes at 2,000 to 3,500 psi. A bare wand leaves stripes, and any later sealer magnifies every overlap line, so the wand is kept for edges, steps and detail work.
04
Post-treat and detail the edges
A post-treatment evens out the tone across the whole slab. Curbs, steps, expansion joints and the edges along the house and lawn then receive a final rinse and detail, so the surface dries evenly from edge to edge.
05
Stay off for a few hours
Keep people and cars off cleaned areas for at least 3 hours. After sealing, the wait is up to 96 hours so the coating can cure as well as possible, and vehicles always wait longer than foot traffic, so plan around it.
FOR CIRCLE PINES HOMES
What to know before your visit
SPRING
Wash off the winter
A spring wash takes off the salt, sand and grime winter leaves behind, and it reveals any new scaling, the flaking of the top surface, since a scaled slab should never be sealed.
SPRINKLERS
Keep rust off
Aim sprinkler heads at the lawn. Water that hits concrete leaves orange fans that trace the throw of the head, and they return after treatment until the head is moved.
PAVERS
Joint sand goes in last
On pavers, polymeric joint sand goes in only once everything is fully dry, and every grain is swept off the faces first, or it activates into a haze.
SEALING
Mind the weather
Cold nights and heavy morning dew are how a fresh seal turns milky. If a fall weather window is marginal, a sealing job is better booked for spring.
HOW PRICING WORKS
Quoted after we see the surface
YOUR CONCRETE JOB AT A GLANCE
QUOTE FIRST
Concrete washing
Quoted
Driveways, walks, patios, steps and pavers, surface cleaned
Rust or oil stain removal
Quoted
Stain-specific chemistry, on request
Stripping, sanding and sealing
In person
A 2 to 3 day project, priced by Carson in person
Concrete under 2 years old
Not yet
Pressure washing waits until the slab has cured
Builders and commercial sites
In person
Quoted in person by Carson
Every slab is different
Quote first
Concrete washing is quoted after Carson sees the surface, its age and what is on it. Stripping, sanding and sealing are priced by Carson in person, never over the phone, because the preparation and the weather window determine the job.
THE OWNER
The person who quotes your home does the work
Glass House is owned and run by Carson Brenny, with no crews, subcontractors or handoffs. He grew up in Ham Lake, went to Blaine High School and has worked full-time in exterior cleaning for six years. The person who quotes your home is the person who arrives, does the work and walks it with you at the end.
Every job receives the gentlest method that will do the work, because too much force or too strong a mix can cause damage that no cleaning undoes. Every homeowner receives a clear explanation of what is on the house, why the method was chosen and what cleaning can and cannot fix, before any money is spent.
IN CARSON'S WORDS
“It's my neighbors' homes: their biggest investment, one of the places they spend the most time, and where the people they care about most live. It's something everyone should enjoy, and I believe that.”
Carson Brenny, owner
WHAT IS INCLUDED
What concrete washing includes, and what it does not
Concrete is the one surface that receives real pressure, and even then it is controlled. A concrete wash covers the following.
INCLUDED
In every concrete wash
• Driveways, walks, patios, steps and pavers
• A pre-treatment that kills organic growth
• Even surface cleaner passes, with no wand stripes
• A post-treatment that evens out the tone
• Edges, curbs and expansion joints rinsed and detailed
NOT INCLUDED
Quoted separately, or not something we do
• Concrete under two years old, which pressure would permanently etch
• Oil, rust, iron, efflorescence, paint and graffiti stains
• Stripping, sanding and sealing, priced by Carson in person
• Repairing cracks, spalling and pitting
• A perfectly uniform finish on older, porous surfaces
EQUIPMENT AND METHODS
A surface cleaner, not a bare wand
Sodium hypochlorite and a spinning surface cleaner at 2,000 to 3,500 psi, high flow. Together they clean the surface, kill organic growth and leave an even finish without etching the concrete. Sealed or stamped concrete receives a test corner first. A heated machine is available on special request for oil, because heat thins oil and draws it out of the pores; it does not come to most jobs.
CIRCLE PINES QUESTIONS
Concrete Washing in Circle Pines: FAQ
Can you clean a new driveway in Circle Pines?
Not until it is two years old. Concrete that young has not finished curing, and pressure would permanently etch the surface. Once it passes two years, it can be cleaned like any other slab. Sealing is a separate question: new concrete waits at least 28 days, and Carson prices any sealing in person.
Do you serve all of Circle Pines?
Yes, every neighborhood in Circle Pines. Glass House is based in Ham Lake, and Circle Pines is part of its regular north metro service area, so there is no trip fee. Carson quotes, cleans and walks every job himself, wherever in Circle Pines your home is.
Can you get oil stains out of my driveway?
Often, and the age of the stain decides how far. Concrete is full of tiny capillaries that draw oil down and outward, so a wash cleans the surface while oil below can rise back up as a shadow. Fresh spills usually come out completely and recent stains nearly so. Old, soaked-in stains improve substantially but may leave a shadow, and more than one application is normal.
Can you remove rust from my driveway?
Yes, with iron-specific chemistry, starting with a spot test. Bleach sets rust rather than removing it, which is why reaching for bleach usually makes the stain worse. Before treating, we make sure the sprinkler that caused it has been re-aimed, or the rust comes back. Iron left long enough bonds to the surface permanently, so the sooner it is treated, the better.
Should I seal my driveway?
Often, yes, and usually with a penetrating sealer. It soaks into the concrete instead of forming a film, so it breathes, cannot peel and holds up to freeze-thaw far better, typically lasting 7 to 10 years. Carson looks at the slab, its age and any previous sealer before recommending anything, and he prices sealing in person.
What should I do with a fresh oil spill?
Act within the first hour, because the clock matters more than the product. Cover the spill with non-clumping clay cat litter or oil-dry, grind it into the surface underfoot so it reaches the oil in the pores, leave it an hour or overnight, then sweep it up and follow with a degreaser.
