top of page

Home › Service Areas › Anoka › Efflorescence Removal

ANOKA COUNTY, MN

Efflorescence removal in Anoka, MN

That white, chalky bloom is mineral salt coming out of the masonry itself.

Efflorescence is the white, crusty bloom on Anoka brick, block, concrete and pavers. It is salt that rises from inside the masonry itself, not a stain that landed on it, and it appears wherever moisture works its way out through the surface.

Efflorescence always comes out before any sealer goes on, because sealing over it locks the bloom under the coating. Carson Brenny, the owner, identifies the bloom, tests the surface and does the removal himself.

A row of windows set into the brick face of a commercial building

HONEST UP FRONT

Efflorescence is cosmetic. We lift what is there, but it can return, because cleaning cannot fix the moisture behind it.

★ Rated 4.9 on Google · 44 reviews

Insured to $2M

Owner-operated

Based in Ham Lake

ANOKA SPECIFICS

What efflorescence removal means in Anoka

The local conditions that shape how Glass House approaches efflorescence removal in Anoka, and the standards it holds to on every visit.

HOMES

A median home built in 1973

Anoka's housing is older than most of the north metro. The median home was built in 1973, and 11% of homes date to 1939 or earlier. Homes of that age often have older paint, wood trim, storm windows and brittle screens. Decades of sun chalk and thin old paint, and high pressure can lift it or force water behind aging trim, so these homes need a gentle, low-pressure wash. Older brick, block and concrete have had decades of moisture carrying salts to the surface.
 

WATER

Six wells, four treatment plants

Nearly all Anoka residents are on city water from six deep wells, and all four treatment plants filter out iron and manganese. Filtering does not soften water, so the hardness remains. When that hard water dries on a house, its minerals stay behind as white spots on glass and a dull film on siding. Deposits left through several summers bond to the glass and become much harder to remove. Orange iron stains are a separate job, because rust removers do nothing to efflorescence and each stain needs its own chemistry.

WATERING

Odd/even watering, June to September

Anoka's odd/even watering schedule, set by address, runs from June 1 to September 1, and no address may water between 10 a.m. and 7 p.m. during that season. Every cycle that reaches the house leaves another thin layer of minerals where the spray dries, so a sprinkler head aimed at siding, glass or the driveway builds white spots in the same place all summer. Aiming heads away from masonry means less water soaking in and fewer salts surfacing.

IDENTIFY FIRST

Three kinds of white

Crusty white on brick, block, concrete or pavers is efflorescence. White chalk that wipes off siding onto your hand is oxidation, the siding itself breaking down. A milky haze inside a sealer is trapped moisture. Each needs a different fix, and the treatment for one can make another permanently worse, which is why every white mark is identified before anything is applied.
 

Sources: Point2Homes, Anoka demographics (U.S. Census ACS 2019-2023); Minnesota Department of Health, Waterline (2023); Know the Flow, City of Anoka; City of Anoka, Water Department.

HOW WE REMOVE IT

The right chemistry, in the right order

Efflorescence removal is acid work on masonry, so the order of each step matters as much as the product itself.

BLEACH AND ACID NEVER MEET

Efflorescence removal is acid work, and house-wash mixes are bleach. Together they produce chlorine gas, so acid never goes on a surface that has been soft washed without a full rinse and dry in between. The same rule applies to anyone working at home.

01

Identify it and spot test

Every job starts with a walk-around. We confirm it is efflorescence, not sealer haze, poly haze or oxidation, and test on a spot nobody sees, because some stone and colored concrete react to acid.

02

Clean in the right order

If the surface also needs degreasing or organic cleaning, that happens first, because oil repels water-based chemistry. Acid always goes last, on its own, after a thorough rinse.

03

Protect everything around it

Plants and landscaping are wet down before, during and after, so anything that drifts lands on a wet surface and is diluted to the point of being harmless. Acid products go on with a pump-up sprayer, never through a pressure washer.

04

Rinse and neutralize

After acid work, the surface is rinsed, neutralized and rinsed again. Residual acid keeps working after we leave and can etch the surface and spoil the bond of any sealer applied later, so this step is never skipped.

05

Stay off for a few hours

Keep people and pets off the treated area for at least 3 hours afterward, so the surface has time to dry and settle before it is walked on again.

FOR ANOKA HOMES

What to know before your visit

NEW CONCRETE

28 days, minimum
 

No sealer goes on new concrete before 28 days. Sealing earlier traps moisture and free lime still working their way out, which shows up as a white haze and efflorescence under the film.
 

PAVER JOINTS

Poly sand haze is different

A white haze on pavers can also be polymeric joint sand left on the faces before it was activated with water. That haze is not efflorescence, so it is identified before anything is treated.

DOWNSPOUTS

Keep masonry drier
 

Downspouts that empty onto pavers or against a brick wall keep the masonry wet, so redirect them away from brick, block and pavers where possible.
 
 

FALL

Watch the dew
 

Cold nights and heavy morning dew turn fresh seals milky, because the coating cannot cure before moisture settles on it. If the fall window is marginal, book the sealing for spring.
 

HOW PRICING WORKS

A spot test first, then a clear quote

YOUR EFFLORESCENCE JOB, AT A GLANCE

QUOTE FIRST

Spot test on your surface

Always first

Every product on every surface, before any work begins

Efflorescence removal

Quoted

Priced after Carson sees the bloom and the surface

If it will not lift

No charge

If the spot test shows we cannot complete it, you do not pay

Sealing afterward

In person

A separate project, priced by Carson in person

Builders and commercial sites

In person

Quoted in person by Carson

Every surface is different

Test first

Efflorescence removal is quoted after Carson walks the property, because the surface, the amount of bloom and whether it sits under a sealer all change the job. You will know what to expect before any work starts.

Carson Brenny, owner of Glass House, cleaning the glass on a front entry door with his ladder set up beside the home

THE OWNER

The person who quotes your home does the work

Glass House is owned and run by Carson Brenny, with no crews, subcontractors or handoffs. He grew up in Ham Lake, went to Blaine High School and has worked full-time in exterior cleaning for six years. The person who quotes your home is the person who arrives, does the work and walks it with you at the end.

Every job receives the gentlest method that will do the work, because too much force or too strong a mix can cause damage that no cleaning undoes. Every homeowner receives a clear explanation of what is on the house, why the method was chosen and what cleaning can and cannot fix, before any money is spent.

IN CARSON'S WORDS

“It's my neighbors' homes: their biggest investment, one of the places they spend the most time, and where the people they care about most live. It's something everyone should enjoy, and I believe that.”

Carson Brenny, owner

WHAT IS INCLUDED

What efflorescence removal includes, and what it does not

Each efflorescence job covers identification, testing and a careful acid treatment. The moisture source and any sealing are separate matters.

INCLUDED

In every efflorescence job

•  Confirmation that it is efflorescence, not sealer haze or oxidation

•  A test on a spot nobody sees

•  Organic cleaning or degreasing first, when needed

•  The remover applied on its own, after a full rinse

•  A rinse, neutralizing and a second rinse

NOT INCLUDED

Outside efflorescence removal

•  Diagnosis or repair of the moisture source

•  A promise it will not return while moisture moves through

•  Sealer on new pavers before their first full season

•  Masonry repair, tuckpointing or regrading

EQUIPMENT AND METHODS

A remover made for efflorescence

Efflorescence removers are acidic, so they go on with a pump-up sprayer, never through a pressure washer, in rubber gloves, a respirator and safety glasses. The remover is applied last and alone, after a full rinse and dry, and the surface is then rinsed, neutralized and rinsed again.

ANOKA QUESTIONS

Efflorescence Removal in Anoka: FAQ

Will efflorescence come back on my Anoka pavers?

It can. Removal lifts the salts on the surface now, but it does not change the moisture moving through the masonry, so new salts can surface later. That is why efflorescence removal is considered cosmetic, and why we explain it before any work starts, so the result matches what you expect.

Do you serve all of Anoka?

Yes, every neighborhood in Anoka. Glass House is based in Ham Lake, and Anoka is part of its regular north metro service area, so there is no trip fee. Carson quotes, cleans and walks every job himself, wherever in Anoka your home is.

What is the white stuff on my brick or pavers?

Most likely efflorescence: mineral salts carried out of the masonry by moisture and left behind as the water dries. It appears as a white, chalky or crusty bloom. Similar-looking white can also come from a sealer that trapped moisture or from joint sand left on pavers, so it is worth identifying before anything is treated.

Can I use a rust remover on it?

No. Rust removers such as F9 BARC are made for iron and do nothing to efflorescence, which is a salt deposit rather than a metal stain. It needs an efflorescence or calcium remover, applied after a spot test, and never on a surface recently washed with bleach without a full rinse and dry.

My new pavers are turning white. What should I do?

Often, give them time. New pavers usually need a full season for efflorescence to work its way out, and much of it can settle on its own. They should not be sealed until it has, or the bloom gets locked under a clear coat.

How much does efflorescence removal cost?

It is quoted after Carson sees the surface and runs a spot test, because the surface, the amount of bloom and whether it sits under a sealer all change the job. If the test shows it is not a job we can complete, there is no charge.

Request your efflorescence removal quote in Anoka

Send a few photos or book a walk-around. Carson looks at your home in person and confirms the exact price before any work begins.

or call (612) 294-⁠8796

Fully insured to $2M

Owner-operated

Locally owned in Ham Lake

MORE FROM GLASS HOUSE

bottom of page