Home › Service Areas › Lino Lakes › Efflorescence Removal
ANOKA COUNTY, MN
Efflorescence removal in Lino Lakes, MN
That white, chalky bloom is mineral salt coming out of the masonry itself.
Efflorescence is the white, crusty bloom on Lino Lakes brick, block, concrete and pavers. It is salt that rises from inside the masonry itself, not a stain that landed on it, and it appears wherever moisture works its way out through the surface.
Efflorescence always comes out before any sealer goes on, because sealing over it locks the bloom under the coating. Carson Brenny, the owner, identifies the bloom, tests the surface and does the removal himself.
HONEST UP FRONT
Efflorescence is cosmetic. We lift what is there, but it can return, because cleaning cannot fix the moisture behind it.
★ Rated 4.9 on Google · 44 reviews
Insured to $2M
Owner-operated
Based in Ham Lake
LINO LAKES SPECIFICS
What efflorescence removal means in Lino Lakes
The local conditions that shape how Glass House approaches efflorescence removal in Lino Lakes, and the standards it holds to on every visit.
HOMES
A median home built in 1993
The median Lino Lakes home was built in 1993, and about 45% of homes date from the 1990s and 2000s. After about three decades of sun, vinyl siding and painted trim begin to break down into a chalky film called oxidation. Rain running over the chalk leaves streaks, and the roughened surface gives dirt and algae a better grip. Newer pavers and concrete often bloom in their first seasons, before any sealer should go on.
WATER
255 PPM and a new plant
Lino Lakes water runs about 255 PPM (parts per million) of hardness, with polyphosphate added to control iron. The city's first treatment plant is due in fall 2026 because manganese exceeded state health guidelines, and nearly 1,500 properties use private wells. Polyphosphate keeps iron dissolved in the pipes, but once sprinkler water dries on a house, the iron can still oxidize into orange stains, and the hardness leaves white spots. Orange iron stains are a separate job, because rust removers do nothing to efflorescence and each stain needs its own chemistry.
WATERING
No midday lawn watering, all year
Lino Lakes prohibits lawn watering from 10 a.m. to 6 p.m. all year and adds an odd/even schedule from May 15 to September 15. Homes on private wells are exempt. Because private wells can water on any day, every cycle that reaches the house leaves another thin layer of iron and minerals where the spray dries. That is how orange fans build up on siding and driveways. Aiming heads away from masonry means less water soaking in and fewer salts surfacing.
IDENTIFY FIRST
Three kinds of white
Crusty white on brick, block, concrete or pavers is efflorescence. White chalk that wipes off siding onto your hand is oxidation, the siding itself breaking down. A milky haze inside a sealer is trapped moisture. Each needs a different fix, and the treatment for one can make another permanently worse, which is why every white mark is identified before anything is applied.
Sources: Point2Homes, Lino Lakes demographics (U.S. Census ACS 2019-2023); City of Lino Lakes, Water or Sewer Concerns, Drinking Water Report 2025 and Public Water Advisory; USGS, Hardness of Water; City of Lino Lakes, Water or Sewer Concerns.
HOW WE REMOVE IT
The right chemistry, in the right order
Efflorescence removal is acid work on masonry, so the order of each step matters as much as the product itself.
BLEACH AND ACID NEVER MEET
Efflorescence removal is acid work, and house-wash mixes are bleach. Together they produce chlorine gas, so acid never goes on a surface that has been soft washed without a full rinse and dry in between. The same rule applies to anyone working at home.
01
Identify it and spot test
Every job starts with a walk-around. We confirm it is efflorescence, not sealer haze, poly haze or oxidation, and test on a spot nobody sees, because some stone and colored concrete react to acid.
02
Clean in the right order
If the surface also needs degreasing or organic cleaning, that happens first, because oil repels water-based chemistry. Acid always goes last, on its own, after a thorough rinse.
03
Protect everything around it
Plants and landscaping are wet down before, during and after, so anything that drifts lands on a wet surface and is diluted to the point of being harmless. Acid products go on with a pump-up sprayer, never through a pressure washer.
04
Rinse and neutralize
After acid work, the surface is rinsed, neutralized and rinsed again. Residual acid keeps working after we leave and can etch the surface and spoil the bond of any sealer applied later, so this step is never skipped.
05
Stay off for a few hours
Keep people and pets off the treated area for at least 3 hours afterward, so the surface has time to dry and settle before it is walked on again.
FOR LINO LAKES HOMES
What to know before your visit
NEW CONCRETE
28 days, minimum
No sealer goes on new concrete before 28 days. Sealing earlier traps moisture and free lime still working their way out, which shows up as a white haze and efflorescence under the film.
PAVER JOINTS
Poly sand haze is different
A white haze on pavers can also be polymeric joint sand left on the faces before it was activated with water. That haze is not efflorescence, so it is identified before anything is treated.
DOWNSPOUTS
Keep masonry drier
Downspouts that empty onto pavers or against a brick wall keep the masonry wet, so redirect them away from brick, block and pavers where possible.
FALL
Watch the dew
Cold nights and heavy morning dew turn fresh seals milky, because the coating cannot cure before moisture settles on it. If the fall window is marginal, book the sealing for spring.
HOW PRICING WORKS
A spot test first, then a clear quote
YOUR EFFLORESCENCE JOB, AT A GLANCE
QUOTE FIRST
Spot test on your surface
Always first
Every product on every surface, before any work begins
Efflorescence removal
Quoted
Priced after Carson sees the bloom and the surface
If it will not lift
No charge
If the spot test shows we cannot complete it, you do not pay
Sealing afterward
In person
A separate project, priced by Carson in person
Builders and commercial sites
In person
Quoted in person by Carson
Every surface is different
Test first
Efflorescence removal is quoted after Carson walks the property, because the surface, the amount of bloom and whether it sits under a sealer all change the job. You will know what to expect before any work starts.
THE OWNER
The person who quotes your home does the work
Glass House is owned and run by Carson Brenny, with no crews, subcontractors or handoffs. He grew up in Ham Lake, went to Blaine High School and has worked full-time in exterior cleaning for six years. The person who quotes your home is the person who arrives, does the work and walks it with you at the end.
Every job receives the gentlest method that will do the work, because too much force or too strong a mix can cause damage that no cleaning undoes. Every homeowner receives a clear explanation of what is on the house, why the method was chosen and what cleaning can and cannot fix, before any money is spent.
IN CARSON'S WORDS
“It's my neighbors' homes: their biggest investment, one of the places they spend the most time, and where the people they care about most live. It's something everyone should enjoy, and I believe that.”
Carson Brenny, owner
WHAT IS INCLUDED
What efflorescence removal includes, and what it does not
Each efflorescence job covers identification, testing and a careful acid treatment. The moisture source and any sealing are separate matters.
INCLUDED
In every efflorescence job
• Confirmation that it is efflorescence, not sealer haze or oxidation
• A test on a spot nobody sees
• Organic cleaning or degreasing first, when needed
• The remover applied on its own, after a full rinse
• A rinse, neutralizing and a second rinse
NOT INCLUDED
Outside efflorescence removal
• Diagnosis or repair of the moisture source
• A promise it will not return while moisture moves through
• Sealer on new pavers before their first full season
• Masonry repair, tuckpointing or regrading
EQUIPMENT AND METHODS
A remover made for efflorescence
Efflorescence removers are acidic, so they go on with a pump-up sprayer, never through a pressure washer, in rubber gloves, a respirator and safety glasses. The remover is applied last and alone, after a full rinse and dry, and the surface is then rinsed, neutralized and rinsed again.
LINO LAKES QUESTIONS
Efflorescence Removal in Lino Lakes: FAQ
Will efflorescence come back on my Lino Lakes pavers?
It can. Removal lifts the salts on the surface now, but it does not change the moisture moving through the masonry, so new salts can surface later. That is why efflorescence removal is considered cosmetic, and why we explain it before any work starts, so the result matches what you expect.
Do you serve all of Lino Lakes?
Yes, every neighborhood in Lino Lakes. Glass House is based in Ham Lake, and Lino Lakes is part of its regular north metro service area, so there is no trip fee. Carson quotes, cleans and walks every job himself, wherever in Lino Lakes your home is.
What is the white stuff on my brick or pavers?
Most likely efflorescence: mineral salts carried out of the masonry by moisture and left behind as the water dries. It appears as a white, chalky or crusty bloom. Similar-looking white can also come from a sealer that trapped moisture or from joint sand left on pavers, so it is worth identifying before anything is treated.
Can I use a rust remover on it?
No. Rust removers such as F9 BARC are made for iron and do nothing to efflorescence, which is a salt deposit rather than a metal stain. It needs an efflorescence or calcium remover, applied after a spot test, and never on a surface recently washed with bleach without a full rinse and dry.
My new pavers are turning white. What should I do?
Often, give them time. New pavers usually need a full season for efflorescence to work its way out, and much of it can settle on its own. They should not be sealed until it has, or the bloom gets locked under a clear coat.
How much does efflorescence removal cost?
It is quoted after Carson sees the surface and runs a spot test, because the surface, the amount of bloom and whether it sits under a sealer all change the job. If the test shows it is not a job we can complete, there is no charge.
