Home › Service Areas › Anoka › Deck Washing
ANOKA COUNTY, MN
Deck washing in Anoka, MN
A clean deck from a soft wash matched to the boards, without blasting the wood.
Anoka decks sit under trees, beside lawns and in the shade of the house, so they green up, turn gray and collect a season of grime. Glass House soft washes them, so the chemistry kills the growth at the root and the boards never need force.
A properly sealed finish is what protects deck boards from rot and weather, so the finish is checked before any mix goes on. An unsealed or failing surface can discolor during washing, and it is better to know that before the work starts.

GENTLE BY DESIGN
High pressure never touches your boards. The soft wash is matched to wood or composite before it is applied.
★ Rated 4.9 on Google · 44 reviews
Insured to $2M
Owner-operated
Based in Ham Lake
ANOKA SPECIFICS
What deck washing means in Anoka
The local conditions that shape how Glass House approaches deck washing in Anoka, and the standards it holds to on every visit.
TREES
41 years as Tree City USA
Anoka is in its 41st year as a Tree City USA community and issues citations citywide for diseased trees, with emerald ash borer confirmed in Anoka County. Mature trees shade roofs and north walls, so those surfaces stay damp long after rain, and damp surfaces are where algae and mildew begin. Fallen leaves settle in gutters and on roofs, where they hold moisture against the surface. Shade keeps deck boards damp after rain and dew, and damp boards grow algae first.
RIVERS
Where the Rum meets the Mississippi
Anoka sits at the confluence of the Rum and Mississippi Rivers, which the city calls two of its greatest natural resources. Air near two rivers holds more moisture, so roofs, siding and decks dry slowly after rain and morning dew. Algae, mildew and moss take hold on surfaces that stay damp, usually starting on the shaded north side. Decks near water stay damper and green up sooner than decks on drier lots.
HOMES
A median home built in 1973
Anoka's housing is older than most of the north metro. The median home was built in 1973, and 11% of homes date to 1939 or earlier. Homes of that age often have older paint, wood trim, storm windows and brittle screens. Decades of sun chalk and thin old paint, and high pressure can lift it or force water behind aging trim, so these homes need a gentle, low-pressure wash. Decks that age have weathered many winters, so we check first for loose or rotted boards.
WATER
Six wells, four treatment plants
Nearly all Anoka residents are on city water from six deep wells, and all four treatment plants filter out iron and manganese. Filtering does not soften water, so the hardness remains. When that hard water dries on a house, its minerals stay behind as white spots on glass and a dull film on siding. Deposits left through several summers bond to the glass and become much harder to remove. Keep sprinklers off the deck: hard water spots the boards, and iron stains them orange.
Sources: City of Anoka, Trees, Weeds & Landscape; City of Anoka, Diseased Tree Control; City of Anoka, Storm Water; Point2Homes, Anoka demographics (U.S. Census ACS 2019-2023); Minnesota Department of Health, Waterline (2023); Know the Flow, City of Anoka.
HOW WE WASH DECKS
The mix is matched to the boards
Wood and composite take different mixes and different dwell times (the minutes a solution stays on before it is rinsed). We always start with the lightest mix the surface will take and work up only if needed.
WHY NEVER HIGH PRESSURE
High pressure raises and splinters the grain of wood, leaving the boards fuzzy, and it can permanently scar composite and strip a finish. On a deck, force causes the very damage the cleaning is meant to prevent, which is why chemistry does the cleaning and the rinse stays gentle.
01
Walk it first
Every visit starts with a walk-around of the boards, railings, stairs and finish. Carson confirms the right mix for the surface and points out anything loose, rotted or failing before cleaning begins. Fragile surfaces, such as rotten wood or a failing coating, may call for a signed damage waiver.
02
Protect the plants
Planters, beds and landscaping around and beneath the deck are soaked with water before, during and after the wash, along with nearby windows. Any drift that lands on a pre-wet surface is diluted to the point of being harmless, which is why plants survive a soft wash.
03
Apply the right mix
A sodium hypochlorite solution, similar to a diluted household bleach, goes on at 1 to 3 percent, lighter on finished wood, and dwells 10 to 15 minutes to kill the growth at the root. Composite receives a lighter mix and a shorter dwell. A second application is normal; an overly strong mix damages finishes permanently.
04
Rinse delicately
The rinse runs at low pressure from top to bottom, railings and stairs included, so no solution is left behind to discolor the boards. High flow at low pressure rinses the deck thoroughly and efficiently, using less water overall than working at one surface for an hour.
05
Walk it, then let it dry
Carson walks the finished deck with you, and before and after photos are attached to your receipt. Keep people, pets and furniture off the boards for at least 3 hours while they dry.
FOR ANOKA HOMES
What to know before your visit
SPRING
Ready for summer
A spring wash takes off winter grime and last fall's leaf marks before the furniture goes back out, so the deck is ready for the season.
SUMMER
Whenever it greens up
Shaded decks can green up in the middle of the season, and a soft wash kills that growth at the root, so the boards come back clean without high pressure.
FALL
Clear the leaves
Blow leaves off the deck before they mat down. Wet leaves left through winter hold moisture against the boards and leave tannin marks that show in spring.
BEFORE WE COME
Clear the deck
Move chairs, planters and cushions off the deck before the visit, and mention any cedar, teak, ipe or other specialty wood when you book.
HOW PRICING WORKS
Quoted by the size of your deck
YOUR DECK WASH AT A GLANCE
QUOTE FIRST
Deck washing
Quoted
Wood or composite deck, stairs and railings
Cedar restoration
Quoted
Wash, brighten and seal, the one wood we seal
Plant protection
Included
Landscaping rinsed before, during and after
Walk-around first
Included
Loose boards and failing finishes flagged before we start
Builders and commercial sites
In person
Quoted in person by Carson
Priced by the size of your deck
Quote first
Deck washing is quoted after Carson sees the deck, its material and its finish. Send a photo or book a walk-around, and you will receive an exact price before any work starts.

THE OWNER
The person who quotes your home does the work
Glass House is owned and run by Carson Brenny, with no crews, subcontractors or handoffs. He grew up in Ham Lake, went to Blaine High School and has worked full-time in exterior cleaning for six years. The person who quotes your home is the person who arrives, does the work and walks it with you at the end.
Every job receives the gentlest method that will do the work, because too much force or too strong a mix can cause damage that no cleaning undoes. Every homeowner receives a clear explanation of what is on the house, why the method was chosen and what cleaning can and cannot fix, before any money is spent.
IN CARSON'S WORDS
“It's my neighbors' homes: their biggest investment, one of the places they spend the most time, and where the people they care about most live. It's something everyone should enjoy, and I believe that.”
Carson Brenny, owner
WHAT IS INCLUDED
What deck washing includes, and what it does not
Glass House washes wood but does not stain or seal it, with one exception. Only the work on your approved estimate is included, and anything added on site is priced separately.
INCLUDED
In every deck wash
• Deck boards, railings and stairs
• Algae, mildew, pollen and dirt lifted
• A mix matched to wood or composite, lighter on finished wood
• Plants wet down before, during and after
• A delicate, low-pressure rinse
• Before and after photos attached to your receipt
NOT INCLUDED
Outside a deck wash
• Staining or sealing wood, except cedar restoration
• Fixing a peeling, failing or unsealed finish
• Rot, loose boards, splinters or structural repair
• Rust, oil, paint and other specialty stains
EQUIPMENT AND METHODS
A soft wash made for wood
The soft wash system applies sodium hypochlorite at 1 to 3%, lighter on finished wood and with no surfactant (the additive that makes a mix cling, and takes far more water to rinse). It dwells 10 to 15 minutes and is rinsed delicately. Composite receives a lighter mix and a shorter dwell, and no pressure wand ever touches the boards.
ANOKA QUESTIONS
Deck Washing in Anoka: FAQ
Do homes near the water in Anoka cost more?
No. Being near the Rum or the Mississippi does not change the price, and those homes are quoted the same way as any other in Anoka. We do recommend deck washing more often there, because humid air keeps surfaces damp after rain and morning dew, and damp surfaces are where algae and mildew grow back fastest.
Do you serve all of Anoka?
Yes, every neighborhood in Anoka. Glass House is based in Ham Lake, and Anoka is part of its regular north metro service area, so there is no trip fee. Carson quotes, cleans and walks every job himself, wherever in Anoka your home is.
Will you pressure wash my deck?
No. High pressure raises and splinters the grain on wood and can permanently scar composite. Glass House soft washes decks instead: a mild solution matched to the boards is left to kill the growth, then rinsed away at low pressure, around 300 psi, which comes out much like a garden hose.
Do you stain or seal decks?
No, with one exception. Glass House washes wood decks but does not stain or seal wood, other than cedar. Cedar turns gray under any wash solution, so it receives a separate restoration: it is washed, brightened to restore its color, then sealed. Cedar is the only wood we seal.
Can you clean a composite deck?
Yes. Composite boards do not rot, but algae and mildew grow on the dirt and pollen that sit on top of them. Because the growth sits on the surface rather than in the board, composite receives a lighter mix and a shorter dwell than wood, followed by a low-pressure rinse.
How soon can we use the deck again?
Allow at least 3 hours after the final rinse before people, pets or furniture go back on the deck, so the boards can dry. Carson confirms the timing when he walks the finished deck with you, and before and after photos are attached to your receipt.